2、检查阿里云服务器数据盘情况,这里我们可以看到数据盘有没有挂载
3、挂载阿里云数据硬盘。输入"fdisk /dev/vdb",然后根据下图的提示,输入n,p,1,回车,回车,wq,保存退出。
4、格式化分区
5、挂载数据盘,这里选择挂载到root下面
6、使其重启永久生效
[root@test ~]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000b6c99
Device Boot Start End Blocks Id System
/dev/vda1 * 2048 83886046 41941999+ 83 Linux
Disk /dev/vdb: 100.4 GB, 107374182400 bytes, 209715200 sectors 需要挂载的磁盘
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[root@test~]# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xc247eca8.
Command (m for help): n 输入n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p 输入p
Partition number (1-4, default 1): 1
First sector (2048-209715199, default 2048): 回车
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-209715199, default 209715199): 回车
Using default value 209715199
Partition 1 of type Linux and of size 100 GiB is set
Command (m for help): wq 输入wq退出
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@test~]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000b6c99
Device Boot Start End Blocks Id System
/dev/vda1 * 2048 83886046 41941999+ 83 Linux
Disk /dev/vdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xc247eca8
Device Boot Start End Blocks Id System
/dev/vdb1 2048 209715199 104856576 83 Linux 已创建/dev/vdb1分区
[root@test~]# mkfs.ext4 /dev/vdb1 格式化磁盘
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
6553600 inodes, 26214144 blocks
1310707 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2174746624
800 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
[root@test~]# mkdir /mnt 创建挂载目录
mkdir: cannot create directory ‘/mnt’: File exists
[root@Hilbert ~]# echo /dev/vdb1 /mnt ext4 defaults 0 0 >>/etc/fstab
[root@Hilbert ~]# cat /etc/fstab 写入新分区信息
#
# /etc/fstab
# Created by anaconda on Wed May 25 02:12:53 2022
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=d71b01a9-bf24-4afb-b7d9-3a0961522139 / ext4 defaults 1 1
/dev/vdb1 /mnt ext4 defaults 0 0
[root@test~]# mount /dev/vdb1 /mnt 把分区挂载在/mnt目录下
[root@test~]# df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs 3.9G 608K 3.9G 1% /run
tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/vda1 40G 2.1G 36G 6% /
tmpfs 783M 0 783M 0% /run/user/0
/dev/vdb1 98G 61M 91G 1% /mnt 新挂载的分区
欢迎分享,转载请注明来源:夏雨云
评论列表(0条)