翻译中译英

The main purpose is to research and experiment multi-walled carbon nanotubes (MWCNTs) / polycarbonate (PC) resin composite materials, the preparation methods and properties.

In order to improve the multi-walled carbon nanotubes and compatibility of resin, improve the polycarbonate multi-walled carbon nanotubes and polycarbonate resin, using the interface properties of sulfuric acid multi-walled carbon nanotubes surface modification. Using the infrared spectrum, X-ray photoelectron spectroscopy and thermogravimetric analysis of modified carbon nanotubes were the experimental data obtained will made by acid treatment of graph, the different time multi-walled carbon nanotubes are compared. Results show that the length of time, acid treatment effect of multi-walled carbon nanotubes, acid treatment time multi-walled carbon nanotubes were introduced in more active group, also can save the original carbon.

This experiment with solution for blending multi-walled carbon nanotubes/polycarbonate resin composites, use of composite FESEM microstructure observation. Will composite spinning and pure polycarbonate resin spinning. Results show that the polycarbonate resin spinnability, low multi-walled carbon nanotubes/polycarbonate resin composites is not suitable for spinning. Will multi-walled carbon nanotubes/polycarbonate resin composite pressure due to insufficient pressure molding process of mould effect is not ideal. Because the pressure by moulding machine, unstable, cause diaphragm contains a lot of bubbles.

20-100万倍。碳纳米管，又名巴基管，是一种具有特殊结构（径向尺寸为纳米量级，轴向尺寸为微米量级，管子两端基本上都封口）的一维量子材料。碳纳米管sem20-100万倍之间连续可调，有很大的景深，视野大，成像富有立体感，可直接观察各种试样。

碳纳米管及其与聚合物的复合简介碳纳米管及其与聚合物的复合简介碳纳米管及其与聚合物的复合简介碳纳米管及其与聚合物的复合简介 文杰斌 113112146 1. 陶泳,高滋. 碳纳米管的研究进展[J]. 化学世界. 2006,(4):238-243. 摘要：碳纳米管是具有由石墨层片卷成的管状结构的一种新型纳米材料，拥有独特的物理化学、电学、热学和机械性能，以及十分诱人的应用前景。对碳纳米管的制备方法、性质、用途及研究新动向进行了简要的综述。 2. 任冬梅,邹小平,程进,李铭,董益阳. 单壁碳纳米管的侧壁共价修饰[J]. 检验检疫科学. 2008,(3):3-5. 摘要：通过3-偶极环加成的方法合成了单壁碳纳米管侧壁共价修饰化合物。通过红外光谱和拉曼光谱表征结果证实了化合物的形成，为进一步构建微／纳传感器件并成功进行检验检疫技术研发奠定了基础。 3.贾士强,张琳,张立曼,胡令金. 定向多壁碳纳米管纯化研究[J]. 纤维复合材料. 2007,(4):40-43. 摘要采用强酸对定向碳纳米管进行氧化处理，改变纳米粒子表面的性质，使其表面具有有机活性，从而抑制纳米粒子问的团聚，有力地改善了碳纳米管在聚合物中的分布。研究表明：采用超声波分散，经强酸氧化，碳纳米管分散性较好；纯化后的碳纳米管表面引入了有机基团；电镜分析表明，碳纳米管呈单管分散在基体中；溶液为碱性状态下，碳纳米管分散性最优。 4. 唐玉硅,顾军渭,孔杰. 多壁碳纳米管(MW-CNTs)表面纯化改性研究[J]. 西安石油大学学报. 2009,(1):67-70. 摘要：采用浓HC1、浓HNO3、H2SO4/HNO3、溴水、K2Cr207／H2SO4等强酸及强氧化荆对多壁碳纳米管(MWNTs)进行纯化改性处理．采用X射线衍射(Ⅺ )、傅立叶红外光谱(FrIR)和透射电镜(TEM)等手段对产物改性前后的结构及性能进行分析表征．结果表明：纯化改性处理能够除去杂质，截短碳纳米管，使其表面的羟基、羧基和羰基的含量明显提高

---